Innerpanel cavity wax is a type of wax that is specifically formulated for use in the inner cavities of automotive panels. It is a chemically formulated wax-based rustproofing that creeps and penetrates into cracks and close-fitting areas. It creates a barrier between the metal and the environment, acting as a rust inhibitor, helping protect the metal from rust and corrosion. Innerpanel cavity wax typically comes in clear/amber and black colors.
Innerpanel cavity wax is typically applied using a brush or a spray gun. It also comes in a DIYer kit (see link below) that does not require any special equipment for application. The wax is applied in a thin and uniform layer, making sure to cover all the areas that need protection. Once applied, the wax should be allowed to dry completely before any additional coating or painting is applied. Typical coverage when spraying is approximately 100-150 sq ft per gallon at 4-6 mil wet coat.
The wax is usually applied after the panel is cleaned, when coming from the manufacturer, but it can be applied into a hard-to-reach area, without prior cleaning, when working with a used vehicle. The wax can be applied to bare metal and painted over, or it can be applied over top of paint. Innerpanel cavity wax is typically applied as a liquid, although some manufacturers also offer a spray-on version. Taping off electrical wires and connections is unnecessary when spraying innerpanel wax as it does not affect electrical systems or door and window mechanisms.
It’s important to note that the use of Innerpanel cavity wax is not a permanent solution and will need to be reapplied periodically to maintain its effectiveness. It’s also important to make sure that the wax is compatible with the paint or other coatings that will be applied on top of it.
Innerpanel cavity wax is commonly used on:
• Doors
• Tailgates
• Pillars
• Rocker Panels
• Front and Center Posts
• Rear Trunk and Panels
• Headlight Areas
• Underbody Structural and Frame Members
• Under the Hood
• Rear Quarters
Key Parts is a trusted rust repair panel distributor founded in 1992. They have met the needs of DIY mechanics and body shops for years by providing high-quality replacement panels. With countless satisfied customers, they have an excellent reputation for outstanding service and quality parts. As an authorized Key Parts distributor, Raybuck Auto Body Parts offers these precision-engineered components to help you confidently restore or repair your vehicle.
Key Parts Auto Parts Range
Key Parts offers an extensive selection of rust repair panels and replacement components for more than 250 vehicle makes and models. Their high-quality, die-stamped panels are designed to precisely replace common rust-prone areas such as upper wheel arches, door bottoms and cab corners. We carry the full range of Key Parts auto parts at Raybuck Auto Body Parts. A few examples include:
Rust repair panels: Rocker panels for the driver and passenger sides
Interior components: Door handles, mirrors, window trim, and dash assemblies
Body panels and sheet metal: Body rocker panels for driver and passenger sides, lower door panels and skins, fenders and hoods
Lighting and electrical components: Replacement lighting and electrical components such as parking and headlight bezels, tail light housing, front park light lenses and more
Bumpers and structural components: Front and rear bumpers, bumper bracket kits and bumper guards
Why Partner With Raybuck for Your Part Supplies?
Raybuck Auto Body Parts is passionate about helping you achieve flawless restoration. We stock a wide selection of Key Parts parts and other leading brands to cater to all vehicle makes and models.
Here is what sets us apart:
Unwavering commitment to quality: We partner with modern, high-tech manufacturing plants that follow strict international ISO 9001 standards, proving our commitment to maintaining top quality.
Expert advice and guidance: Our knowledgeable staff possesses a wealth of experience and can answer any questions about Key Parts components or your restoration project.
Seamless shopping experience: Browse our user-friendly website to find the perfect Key Parts components, or visit our store for personalized assistance.
Customer rewards: We value our customers and reward your loyalty through our Raybuck Rewards Program. Earn points on your purchases and enjoy discounts on future orders.
Competitive pricing: We provide Key Parts auto parts at fair prices, giving you access to quality without breaking the bank.
Find the Best Replacement Auto Body Parts to Start Your Repair or Restoration Project!
Experience the Raybuck Advantage and discover why we’re among the best local aftermarket auto body part replacement distributors.
If you’re ready to start your repair or restoration project, add the required parts to your cart or use our quick order tool. Call us at 800-334-0230 or contact us if you have questions or queries.
Auto Metal Direct (AMD) is a renowned manufacturer of high-quality restoration parts for classic American cars and trucks. AMD parts are engineered to meet or exceed original equipment specifications, ensuring a seamless fit and exceptional durability. With a commitment to authenticity and precision, AMD has become a trusted source for DIYers and professionals seeking to restore their vehicles to their former glory. Raybuck Auto Body Parts is a leading Auto Metal Direct distributor.
AMD Product Range
AMD offers an extensive range of parts for various restoration projects, from back cab panels for your 1973-1978 Chevy or GMC C/K pickup to quarter panels for a 1963-1965 Plymouth Satellite. At Raybuck, we carry the full lineup of Auto Metal Direct parts, making finding the exact components you need for your restoration project easy.
AMD also offers trim such as wiper arms, blades and hub caps.
Why Choose Raybuck for Your Replacement Auto Parts?
Raybuck Auto Body Parts has supplied DIY enthusiasts and professional body shops with top-notch aftermarket parts since 1985. Our experienced team thoroughly understands vehicle restoration, and we use these parts on our projects.
We adhere to strict quality guidelines to ensure every part meets the highest standards. Our knowledgeable staff is available to provide expert advice and help you find the right parts for your specific needs. We also offer competitive pricing to give you the best value for your restoration projects.
Explore Raybuck’s Extensive Replacement Part Inventory for Your Restoration Project Today!
Whether you need high-quality, like-new replacement parts for your Chevy/GMC, Dodge, Ford, Jeep, Mercedes-Benz, Nissan, Toyota, Pontiac, Volkswagen or other vehicle make or model, you can count on Raybuck Auto Body Parts to meet your needs. We specialize in vehicle restoration project supplies and stock or source almost any part.
Browse our broad replacement part selection or add a quick order for all your parts. For help or additional information, call us at 800-334-0230 or submit an online contact request form.
Dynacorn is renowned in the automotive restoration industry for its exceptional sheet metal, trim and molding parts for classic muscle cars. With a relentless commitment to quality, Dynacorn utilizes advanced tooling and equipment to produce first-rate body shells and components licensed by leading manufacturers such as GM, Chrysler and Ford.
Dynacorn Body Restoration Parts Product Range
Dynacorn body parts are the gold standard for quality and authenticity in classic muscle car restoration. Raybuck Auto Body Parts offers a comprehensive selection of Dynacorn bodies to support DIYers and body shops, whether you are restoring a classic or building one from the ground up.
Highlights from our product range include:
Body shells: Complete body shells, including 1st Series Chevy Pickup Cabs, Bronco shells and Dynacorn Mustang convertible and fastback bodies
Interior components: High-quality door handles, mirrors, mirror brackets, seat frames and seat belts that match the original specifications
Body panels and sheet metal: OEM-grade quarter panels, rocker panels, floor assemblies, hoods and fenders
Chassis and suspension parts: Specialized components such as torsion bars for Camaro, Firebird and Chevelle, torque boxes and body mounts
Lighting and electrical components: Antennas, console clocks and tachometers for various muscle cars
Dynacorn uses high-grade 1006 Universal grade automotive steel in all its stampings, ensuring cleaner welds and increased durability.
Why Choose Us as Your Go-To for Auto Parts?
Since 1985, Raybuck Auto Body Parts has been a trusted source for high-quality replacement parts. We understand the intricacies of vehicle restoration and are committed to providing parts that match the durability and precision of the originals. Our extensive inventory of Dynacorn body parts ensures access to the necessary components.
Our team of experts is dedicated to delivering exceptional customer service. Whether you are searching for specific Dynacorn Mustang parts or need guidance on the best components for your project, we can help. We prioritize your satisfaction by offering reliable parts and knowledgeable support. Partner with us today and discover the Raybuck Advantage.
Browse Our Extensive Inventory and Add Quality Parts to Your Cart
Raybuck Auto Body Parts uses cutting-edge technology at the highest quality standards to manufacture superior-quality vehicle replacement parts. We are proud of our partnership with several other reputable non-OEM parts manufacturers like Dynacorn and AMD. These leading brands are respected and trusted for their reliability and strength.
For all your auto body replacement parts, browse our selection or add your parts to our quick order list before checking out. To discuss other requirements, call us at 800-334-0230 or complete a contact request form, and we will get back to you.
Taking the next step in your maintenance or restoration project means relying on Raybuck Auto Body Parts. When you need parts for your car’s body, we have your back. We are one of America’s leading suppliers of restoration and replacement auto body parts and will assist you with determining exactly what you need.
You know what your car needs, and we offer the parts of a car exterior you need to complete your restorations. However, it’s a good idea to understand our extensive selection of car parts by referring to our truck and car parts diagrams for essential details.
Our diagram helps you identify each part by name and shows you what the car part looks like and what to expect when ordering it. This diagram also gives you a road map of where to put the parts when doing restorations.
Our body panels — made from heavy-gauge stamped steel — uphold a reputation for quality. Refer to the truck body panel diagram and follow along with each number and truck body part name to learn more about each one and how Raybuck can provide you with top-quality aftermarket replacements. You can also check out this video that walks you through each major rust replacement area on a truck.
1. Bumper / Energy Absorber / Cover
Bumpers are located at the very front of the vehicle, below the front grille. They’re intended to be the first thing to hit an object in front of them (such as another vehicle) and to minimize the impact and damage to the rest of the vehicle, minimizing repair costs. As a result, they often need to be replaced after a front-end collision.
2. Bumper End
Bumper ends are an important addition to the bumper itself. They’re situated at both ends of your front and rear bumper. They seal the larger assembly from the corrosive influence of dirt, water and road debris — all factors that can cause damage to these parts over time.
3. Valance Panel
Also called a bumper valance, these can be found on the front, rear or both on most modern trucks. Valance panels attach to the underside of the bumpers and resemble streamlined plastic “flaps.” This component serves first to help direct airflow in the pursuit of aerodynamics and second to conceal and protect underside components.
4. Inner Fender
Also called inner fender wells, inner fenders can take a beating from the environment and daily driving conditions. They are the portion of the vehicle’s body that sits between the engine and the wheels. They provide protection against outside conditions plus rocks and other types of debris thrown by wheels.
5. Fender
Fenders form an arch on the front side of the vehicle body around each of the wheel openings.. Rotating tires can throw lots of water, snow or pieces of debris while driving, so fenders help mitigate some of this matter.
6. Cowl Panel
The cowl panels sit beneath the lower windshield trim of your car or truck, above the firewall and right at the pivot point for your vehicle’s hood. They typically provide “storage” for windshield wipers when they are not in motion and prevent flying debris and excess moisture from entering the vent panel.
7. Door
The complete truck door is made of several components, but this term refers to the largest panel and shell. A vehicle’s door panel provides attachment points for handles and often side-view mirrors as well. Areas at the bottom of doors can trap water, dirt and debris — especially when drain holes get clogged.
8. Lower Door Skin
Lower door skins tend to experience rust and corrosion — that’s part of their job. Instead of subjecting the entire vehicle’s door panel to harsh treatment from kicks, scuffs, bumps and flying debris, lower door skins offer a replaceable option when just the lower portion of the door has experienced damage, rust or wear and tear.
9. Rocker Panel
Your vehicle’s rocker panels are located between the front and rear tires, along the floor and beneath the vehicle’s doors. Rocker panels are made from steel. They provide structural support and continuity between the front and rear. These parts tend to see especially rough treatment on work trucks and among off-road enthusiasts.
10. Cab Corner
Cab corners on a truck refer to the section of the body at the rear of the cab, between the passenger section and the bed. These steel panels are another environment-facing component that tends to experience damage and corrosion over time.
11. Lower Front Bedside
Your truck’s lower front bedside is an area that receives a lot of kickback from stones, gravel and salt, thanks to its being situated between the cab and the rear wheels. Because of the location, this panel often rusts over time and will need to be replaced.
12. Rear Panel
Your truck’s rear panel is the piece of the body at the rear of the cab, above and overlooking the cab. Rear panels may experience rusting and corrosion, but damage from objects seated loosely in the bed of the truck is even more common.
13. Wheel Arch Panel
Wheel arch panels receive abuse from grime and salt. These are the panels that sit above and around the rear truck wheels. They protect the rest of the body from moisture and debris thrown by your tires, so they often need to be replaced after years of use. Manufacturers tend to put foam in between the wheel arch and the inner wheelhouse, to help limit vibration and noise, but this foam holds moisture and causes both panels to rust.
14. Wheelhouse
A truck’s wheelhouse is the portion of the body at the rear of the truck, above the rear tires. The outer wheelhouse faces the tires, and the inner wheelhouse faces the interior of the bed. Both undergo their share of potential damage and wear and tear from use and the elements.
15. Lower Rear Bedside
This area is the one located between the rear wheel and the rear bumper of your truck. They commonly get scratched, dented and dinged from parking lot bumps or if you accidentally back into another vehicle or object. Road grime, salt, and mud often get stuck on the inside of this panel, which causes it to rust from the inside as well.
16. Header Panel
Header panels are an important part of the body that provides support and mounting locations for grille assemblies and headlights. Keep an eye on this panel – both the visible and covered parts – for rust and other signs of wear.
17. Hood
This component is another one of the most visible and functional parts of your vehicle’s body. The hood protects your engine and other essential components of your truck. Whether you have a rusted or damaged hood, replacing it is often relatively easy.
18. Roof Panel
The roof panel covers the cab of your truck, and you likely don’t give it much thought most days. Because it is often out of site, you may not notice rust or other damage to this panel. Even direct sunlight over prolonged periods can damage your roof panel.
19. Truck Bed Floor
Your truck bed floor takes a beating – from payloads going in and out to salt, water and debris that accumulates in it. Your floor is likely made up of several different panels. Depending on the damage, you may only be able to replace parts of it or certain panels or supports.
20. Wheel Tub
Like the rest of your truck’s bed, the wheel tub is subjected to the elements, plus impacts over time due to heavy use. Wheel tubs are the rounded sections above the rear tires that extend into the bed area.
21. Tailgate
Located at the very back of your truck, there is no end to the ways you can damage a tailgate. Whether you back into a post in a parking lot or get rear-ended while sitting in traffic, tailgates are a commonly damaged component of your vehicle. These will also rust out over time along the lower edge.
SHOP TRUCK BODY PANELS AT RAYBUCK AUTO BODY PARTS
Your truck has hauled everything from fishing gear to trailers and everything in between, and it may need some bodywork. At Raybuck Auto Body Parts, we have quality and durable truck body panels to replace areas that have been worn out or rusted. Our panels use a high steel gauge to provide durable truck parts. All our parts are made with modern technology to give you superior quality that meets OEM standards.
At Raybuck Auto Body Parts, we have a wide selection of truck parts, so you’ll always get what you need. Our customer service staff are knowledgeable and will offer excellent support over the phone. All our parts are available online at competitive prices.
Your car has served you for a long time, and some parts may need replacing or restoring. When you need to replace a car body part, a detailed diagram of car parts can help you identify the correct components. As we explore each part and where to find it, we’ll also mention a few signs that indicate you need to replace that part.
At Raybuck Auto Body Parts, we match your new car part to your existing one. We know our parts well and ensure you have the right ones for your car. Having the exact parts of a car exterior restores the vehicle to like-new condition and enhances its performance.
Similar to our truck diagram, refer to the car auto body parts diagram that coordinates with the following numbers to gain more insight into each product. You can also check out this video that walks you through each major rust replacement area on a car.
1. Bumper / Energy Absorber / Cover
Bumpers are located at the very front and rear of the car. They’re intended to be the first thing to hit an object in front of them and to minimize the impact and damage to the rest of the vehicle, minimizing repair costs, which often means they need to be replaced after a front-end collision.
2. Bumper End
Bumper ends are an important addition to the bumper itself. They’re situated at both ends of your front and rear bumper and seal the larger assembly from the corrosive influence of dirt, water and road debris — all factors that can cause damage over time to parts made from steel and other metals.
3. Valance Panel
These can be found on the front, rear or both on most modern cars. Valance panels attach to the underside of the bumpers and resemble streamlined plastic “flaps.” This component serves first to help direct airflow in the pursuit of aerodynamics and second to conceal and protect underside components.
4. Inner Fender
Also called inner fender wells, inner fenders can take a beating from the environment and daily driving conditions. They’re the portion of the car’s body that sits between the engine and the wheels. They provide protection from outside conditions as well as rocks and other types of debris thrown by the wheels.
5. Fender
Fenders are some of the most recognizable car components. They form an arch — made either of plastic or metal — on the side of the vehicle body, around each of the wheel cutouts. Tires can throw lots of water, snow or pieces of debris while driving, so fenders help mitigate some of this.
6. Cowl Panel
The cowl panels sit beneath the lower windshield trim of your car, above the firewall and right at the pivot point for your vehicle’s hood. They typically provide a place for windshield wipers when not in motion and prevent flying debris and excess moisture from entering the cowl and vent panel.
7. Door
The overall car door is made of several components, but this term refers to the largest outer panel and shell. Your car’s door panel provides attachment points for handles and, more often than not, side-view mirrors. Areas at the bottom of doors can trap water, dirt and debris.
8. Lower Door Skin
Lower door skins often suffer from rust and corrosion. Instead of subjecting the entire car’s door panel to harsh treatment from kicks, scuffs, bumps and flying debris, lower door skins take the worst of the damage and can be replaced when necessary.
9. Rocker Panel
Your car’s rocker panels are located between the front and rear tires, along the floor and beneath the doors. Rocker panels are made from steel. They provide structural support and continuity between the front and rear, as well as protecting the frame of your car from exposure to moisture and dirt.
10. Dogleg
The dogleg is a part of the car’s quarter panel that connects into the rocker panel. It’s located right behind the rear door and in front of the rear wheel opening. This part of the body is a hotspot for damage from road debris as well as rust.
11. Wheel Arch Panel
Wheel arch panels receive abuse from moisture, grime and salt. These are the panels that sit above and around the wheel arches so they are often covered in water, salt and other dirt thrown up from the road by your car’s wheels and other passing vehicles.
12. Wheelhouse
The wheelhouse is the portion of the body located above your car’s tires. These components can experience their share of potential damage and wear-and-tear from use and the elements.
13. Quarter Panel
The quarter panel on your car is located between the rear door and the trunk. These panels are often damaged in parking lots, fender benders, or rear-end traffic accidents. For some vehicles, you can purchase just the lower rear quarter panel section so that you do not have to replace the entire quarter panel. Lower rear quarter panels usually go from a trim line in the body down and extend from the wheel opening back to the bumper.
14. Fender Extension Panel
Fender extension panels improve the functionality and aesthetic appeal of the fender itself. They’re typically located between the bumper and the fender and provide additional impact resistance.
15. Header Panel
Header panels are located above your bumper and offer a place for your headlights and grille to attach. They might be made from sheet metal, fiberglass or even plastic depending on the car’s year, make and model.
16. Hood
Your car’s hood is another one of its most visible and functional components. Driving a vehicle with a compromised hood can introduce debris and other hazards to your engine, possibly causing far worse damage than the rust you were putting off fixing.
17. Firewall
The firewall is a hugely important piece of every car that separates the frame and engine from the passenger compartment. In the event of a collision, the firewall protects drivers and passengers from the bulk that is the vehicle’s engine compartment.
18. Fender Flare
A fender flare on a car is an extension of the fender that provides extra coverage for extended or oversized wheels. It’s important because of the amount of snow, rain and debris spinning wheels can kick up. Fender flares help protect the rest of your car from this flying debris.
19. Trunk / Deck Lid
The truck or deck lid of your car is a cover that gives you access to your storage area. It’s affixed with hinges and may be opened manually with a push-button or key fob. Truck lids are often damaged in rear end collisions.
GET QUALITY AUTO BODY PANELS AND PARTS FROM RAYBUCK AUTO BODY PARTS
When you shop with Raybuck Auto Body Parts, you will receive top-quality panels, superior customer service and a knowledgeable team to assist you in finding the right truck or car panel. Raybuck’s expert sales representatives will determine which high-value auto body panels and parts fit your needs. We offer competitive pricing and meet premium standards for quality and durability.
Do you have any questions about auto body parts? Get in touch with Raybuck Auto Body Parts by calling us at 800.334.0230 or contacting us online.
Are you ready to order your truck and car parts? Check out our full inventory of auto body parts and panels here.
ated wax-based rustproofing that creeps and penetrates into cracks and close-fitting areas. It creates a barrier between the metal and the environment, acting as a rust inhibitor, helping protect the metal from rust and corrosion. Innerpanel cavity wax typically comes in clear/amber and black colors.
